The piCAN-TFT is a terminal system based on IPC and consisting of a 4.3'' TFT display with a touch function and a RFID reader. The robust plastic housing allows use in harsh environments and is ideal for wall mounting. The CAN bus and Ethernet interfaces provide quick and easy connection to existing control / management systems. Ångström Linux, as an operating system, provides a flexible software environment.
piCAN-TFT can read RFID cards with an operating frequency of 13.56 MHz. Through the use of advanced ICs, the new NFC standard (Near Field Communication) is also supported. Three digital inputs allow the connection and the evaluation of sensors (eg switches). The 6 LED driver outputs can ,for example, control 2 RGB buttons. The brightness for each of the 6 channels is configurable in 256 steps (0% to 99.6%).
Processor module piA-AM335x-PM
ARM Cortex-A8 microprocessor
up to 800 MHz, 1600 ARM MIPS
256MB DDR3 SDRAM
custom µSD card
Supports ISO 14443A & 15693, NFC
1 x 10/100/1000 Mbps Ethernet MAC
2 x USB Type A
I / O
3 x Digital Input
2 x 12V/750mA Output
6 x PWM/LED Driver
12V/100mA Open-Drain Outputs
Frequency: 97kHz, DutyCycle: 0-99.6% (8-bit)
1 x CAN
supports up to 1Mbps data rate
12V/300mA via CAN bus
-10°C to +60°C
Ångström Linux, Kernel 2.6.37 und 3.2.x
Open-Source SDK with required libraries
Cost-effective 13.56 MHz high-range RFID reader for access control and object identification.
PIN keypad with integrated processor module and LED lighting for access control and personal identification.
Networkable 13.56 MHz RFID reader with 2-line OLED display for access control and personal identification.
800MHz ARM® Cortex™-A8 Linux Panel PC (IPC) with industrial interfaces and 10.1" multitouch display
13,56 MHz RFID antenna for user authorization, access control or object recognition
13,56 MHz RFID multifunctional terminal with 4,3" TFT display and GSM module
Control and display system for self-service machines, rental and charging stations, information terminals or kiosk systems