The piCAN-Charger-60V is an intelligent EnergyBus Charger for lithium-ion and lead-acid batteries, with a charge voltage between 14.4 and 56 volts and a maximum charge current of 10 amps in a compact, fanless enclosure.
Due to the independent communication with the device to be charged – either via EnergyBus (CAN), LIN or I²C – the optimum charging voltage and the optimum charge current are determined and provided. The compatibility with various bus systems guarantees the possibility of connecting the charger to a variety of bikes from different manufacturers.
Redundant monitoring of charging parameters ensures a high level of a charge security. The switchable 12V Aux-Output with the voltage sensing enables the activation of deeply discharged batteries and passive EnergyBus-devices.
The compact, fanless design enables the use of the charger in a rough environment.
An internal CAN-Bus-System allows the control of several piCAN-Chargers-60V by a host computer (e.g. piA-AM3505), supports an efficient power and door management, and permits determining and transmitting the charger’s parameters via internet.
Input Voltage Range
124mm x 143mm x 80mm
-10°C - +70°C
EnergyBus incl. 12V Aux-Output
CAN-/ LIN-/ I²C-Bus
1x Electric door opener with Monitoring Contact
1 x Netzanschlusskabel (1,50m)
1 x EnergyBus inkl. 12V AUX-Output (2m)
1 x CAN-Bus (modellabhängig)
1 x Ethernet-Kabel (RJ45, 5m) (modellabhängig)
2 x Taster (modellabhängig)
2 x Status-LED
Smart charger for e-bikes and pedelecs with Bluetooth 4.0 LE interface for over-the-air monitoring.
Reservation, administration and billing system as well as load and energy management for rental systems.
EnergyBus 2.0 charger for the intelligent charging of batteries with up to 10A charging current and 56V charge voltage.
Configurable battery management system with EnergyBus / CANOpen 454 for monitoring and control of 9-15S batteries
Configurable multiplexer module with EnergyBus / CAN for simultaneous charging of up to 5 batteries