Control unit for automatic door opening in locker systems and bicycle rental boxes.
The piCAN-Station is an EnergyBus-compatible input/output module, which can switch connected devices (for example electronic door openers)and/or read signals. External sensors can be connected to the 12V inputs.
Via the CAN-Bus the piCAN-Station is supplied with12V power and can be integrated into a CAN-Bus system.
The necessary configuration of the CAN-Node-ID is carried out via hexencoding switch. Through its integrated CANOpen stack this device is fully EnergyBus-compatible.
The freely programmable microcontroller and an integrated EEPROM enable the programming according to the future use and customer requirements.
Controller | 16-Bit dsPIC (Microchip Technology) 40 MIPS, 128 KB Flash-ROM, 16KB RAM |
EEPROM | 2 KB EEPROM for configuration parameters |
LED | 2 green status LEDs |
Power Supply | 12V ± 5% via CAN-Bus |
Door Opener | 6 x door opener with - high side switch for current limiting - input for reading the door contact - 12V power supply protected by750mA polyfuse |
LED-Outputs | 6 x open drain output for LEDs - with 12V power supply |
Inputs | 6 x 12V input signal for push-button - with power supply protected by 750mA polyfuse |
Connectors | Board Connector 2.54mm (Würth, WR-WTB, Art.-Nr.: 61900611621) Crimp Terminal 2.54mm female (Würth, WR-WTB, Art.-Nr.: 61910113722) |
Enclosure | ABS, black, wall-mounting |
Enclosure Dimensions | X:110mm; Y:131mm; Z:38mm |
Temperature Range | 0-85°C |
Control unit for automatic door opening in locker systems and bicycle boxes.
Technical box contains necessary components for operation and control of the charging station.
Reservation, administration and billing system as well as load and energy management for rental systems.