piA-SF-II is a panel PC based on the piA-AM5728-PM processor module (ARM® Cortex ™ -A15 architecture - AM5728) with 10.1 "multi-touch display, continuous real glass front and LED backlighting. The IPC guarantees continuous operation at the temperature up to + 60 ° C and is fanless.
The system allows data exchange via CAN / CANOpen, Ethernet, WLAN, RS485 and USB as well as wirelessly via GSM / UMTS / LTE.
The use of Linux underlines the sustainability of the system. As an alternative to the preconfigured Ångström basic system, any Linux distributions with ARMv7 support (e.g. Debian, Poky) can be used.
A cross-compiler SDK (C / C ++, QT, various libraries) is available for developing your own applications.
Documentation from a large developer community and countless code examples can be referred to due to the architectural proximity to the widely used beagle boards.
1.5 GHz Arm® Cortex®-A15 cores AM5728
C66x DSP cores
1/2 GB DDR3-1066
128 Mbit NOR-Flash (optional FRAM)
2 Kbit EUI48 EEPROM
10/100 Mbit Ethernet (M12 connector)
2 x CAN-Bus (M12 connector)
RFID / NFC
13.56 MHz RFID incl.NFC
virtual COM port via mini USB
HS USB 2.0
10W class D Stereo
2 x relay output 350mA 24V
2 x LED output 50mA
2 x button input 5V
HDMI, SATA, PCIe
Real time clock
1 x watchdog timer
1 x JTAG
1 x virtual COM port via mini USB
GSM/UMTS (2G/3G) optional
1 x dual-band HSPA + / WCDMA
1 x quad-band GSM / GPRS / EDGE
1 x 868MHz SRD band (optional WMBUS)
1 x WiFi
+12 V DC
15W (30W peak with audio)
-10 ° C to +60 ° C
Plastic housing including display, glass protection and LED backlight
Display (capacitive multi-touch)
TFT 10.1 “, 1280x800 pixels, 16.7M colors, typically 85 ° viewing angle
680cd / m² brightness, 60Hz, contrast ratio: type 800
Yocto 3.1 (Dunfell), Kernel 5.4
Open source SDK with required libraries
800MHz ARM® Cortex™-A8 Linux Panel PC (IPC) with industrial interfaces and 10.1" multitouch display
Universal Computer On Module (COM) based on Sitara AM355x for low-cost IoT solutions.
Starter kit for commissioning of processor modules and fast development of embedded systems.
Fanless 600MHz Cortex A8 Linux IPC with industrial interfaces and 4,3" display in top-hat rail housing
Based on the Cortex ™ -A8 ARM® architecture, the IPC has been designed for continuous use as a data logger.